In this article we will show you how to check IP address in CMD Windows 10, would you like your IP address to be known? We live in a world in which many devices have to converse. We are surrounded by them.

An abbreviation for the Internet Protocol Address is the IP address. It's a numerical address or a numeric label that is used for the communication with other computer systems utilizing Internet Protocol to each device connecting to a computer network.

It has been supplied to each linked system in a network as a unique identification. The IP address shows your network hardware's address. It is used in your network and internationally to link your computer to other systems.

As the name indicates, the IP address of your computer (Internet Protocol) is an address that gives a network identification for your device. Whether it is a local network in a corporate intranet, your house, or a huge Internet network. A unique IP address is also used by each website you visit on the Internet.

There are two primary features of an IP address. It operates as a host or is used for network interface identification. The IP address is used to send and get information from computers to and from a particular network.

We can thus claim that it functions as a host and may be utilized for the identification of network interfaces. There are two types of IP addresses available.

• Internet Protocol Version 4 (IPv4)
• Internet Protocol Version 6 (IPv6)

Internet Protocol Version 4 (IPv4): Older IP address form. Internet Protocol. The ISP was initially planned to be a 32-bit version, and the system was referred to as version 4 of the Internet Protocol.

Internet Protocol Version 6 (IPv6): Each Internet-connected device has a unique IP address. (IPv6) A new version of the IP address is produced to fulfill these requirements.

It's called the IPv6 version. The IP version 6 (IPv6) utilizes 128-bit IP addresses. IPv6 or version 6 of the Internet Protocol was established in 1995, standardized in 1998, but its actual implementation began in the middle of the 2000s.

Step By Step Guide On How To Check IP Address In CMD Windows 10 :-

1. Click the Start button.

   

2. Now go to the search box on the bottom left
3. Type cmd to start the prompt command. See the picture below:

   

4. In the command prompt, use the following code and press enter. ipconfig

   

5. You may now view your system's IP address.

   

Conclusion :-

I hope this article on how to check IP address in CMD Windows 10 helps you and you all enjoyed the tutorial on how to check IP addresses in CMD windows 10. If you have any questions or suggestions, feel free to leave a comment below and I will get back to you as soon as possible. Thanks for reading!